LaserShield® Wireless Detection Unit
Product Guide
You can add extra protection to your home or business. With additional
LaserShield® Wireless Detection Units you can protect
all areas in your home and business. The Wireless Detection Units communicate
with the Master Alarm Unit via wireless radio signals and have a range of 150
feet (without obstructions).
Wireless Communication
The Wireless Detection Units' use a wireless Radio Frequency (RF) to communicate
with the Master Alarm Unit.
Panic button
On the top of every Wireless Detection Unit is a large red button that functions
the same as the one on the Master Alarm Unit. Pressing the panic button will
immediately transmit a wireless signal to the LaserShield®
Master Alarm Unit and an alarm will be activated, notifying the 24 x 7 Rapid
Response Monitoring Service.
Power connection
The Wireless Detection Unit requires a power connection only; there is no need
for a phone line.
Bypass button
A bypass button and indicator light is located under the motion sensor on the
front of the unit. This button enables the user to bypass a bedroom Wireless
Detection Unit at night. A small amber light will flash indicating the unit is
in bypass mode. The bypass button does not affect the function of the panic
button.
Battery back up
The battery will provide up to 12 hours of back up power.
Pet Friendly
A unique Pet Shield instantly snaps into place on the front of the LaserShield®
motion detector on the Wireless Detection Unit. The Pet Shield blocks portions
of the motion sensor so your pet is less likely to trigger an alarm.
